• Stroboscopic Armature Balancing Machine

Stroboscopic Armature Balancing Machine

Description

STROBOSCOPIC DYNAMIC BALANCING MACHINES:

  • R.M.Industries make soft bearing horizontal belt driven dynamic balancing machines are ideally used for Like Pump rotors and Impellers, small Pulleys, Armatures, mixer grinder rotor, small Turbochargers, OE rotor, Electric motor rotors, Textile small spindles, High speed components and many others.
  • This model is soft bearing type horizontal two plane balancing machines with Digital readout systems.
  • Horizontal soft bearing balancing machines are used for balancing component mounted horizontally.
  • This model machine has one base steel plate,two cast iron balancing stands(Pedestals),two electro dynamic pick-ups,Stroboscopic lamp, drive motor, and Electronic digital control panel with stand.
  • Machine is provided with electronic measuring control panel with digital panel meter for amount indication & xenon flash tube with brilliam white light for location position of unbalance.
  • Machine does not require any concrete foundation .It can be operated by plain surface.
  • The special quality stretchable rubber belt is used for driving the rotor under trial.
  • This model machines's electronic panel are specially designed to measure displacement measurement principle.
  • These machines the eliminate the errors due to driving couplings, adaptors and connectors.
  • Machine is very sensitive & accuracies of the order of 0.2 micron.
  • Balancing speed range is 800 to 3000  rpm.
  • Various Models- Suitable for rotors from 0.1 kg upto 30 kg and above.

Standard features Regarding Electronic Digital Control Panels:

  • Unbalance meters are digital display amount indication.
  • Stroboscopic / Digital Location Readout.
  •  Angle indicated by " Freezing Action " of stroboscopic light on the rotor.
  • This controls panel are designed for very easy to operate.
  • To calculate grams we provide range selector switch.
  • We provide Correction unit " +/-" Switch used to add or remove the material from the job for correction.

Technical Specification: For Stroboscopic belt driven dynamic balancing machine

  MACHINE MODEL   Unit   RBSS-3   RBSS-5   RBSS-10   RBSS-20   RBSS-30
  NOMINAL WEIGHT CAPACITY   Kg   0.1-3   0.1-5   0.2-10   0.5-20   1.0-30
  MAXIMUM  DIAMETER OF JOB     mm   100   100   150   200   200
  MAXIMUM  LENGTH  OF JOB   mm   250   250   400   400   700
  BALANCING SPEED RANGE   rpm   800-3000   800-3000   800-3000   800-3000   800-3000
  POWER OF DRIVE MOTOR   hp   0.33   0.33   0.5   0.75   1.0
  MINIMUM UNBALANCE MASS READ   gms   0.05   0.05   0.1   0.1   0.1

  MINIMUM ACHIEVABLE UNBALANCE 

   (FOR MAX.WT. OF THE ROTOR)

   microns or g.mm/kg   0.2-2   0.2-2   0.2-2   0.2-2   0.2-2